Plastic hand siphon pump chemical resistant with 20 inch pickup tube PHSP14S

	Plastic hand siphon pump chemical resistant siphons liquids to lower levels than the height at which the pump is installed. These are easy to prime and start within 6 to 7 squeezing strokes. This plastic hand siphon pump requires no further operation and keeps working in auto position emptying the media being pumped. All plastic hand siphon pumps are equipped with a VENT CAP on top. Opening the cap stops the discharge. To dispense media at levels higher than the pump plastic hand siphon pumps bellow needs to be continuously operated. Plastic hand siphon pumps are supplied complete with flexible corrugated discharge tube. Our HSP14S plastic siphon pump fits 5 gallon pails with as small as .65 inch opening for use with pails bottles or small tanks. Pumps at 1.8 gallon per minute flow. Recommended for use with Solvents Thinner Toluene Acids less than 35 percent Gasoline Kerosene Light oils Diesel oils Chemical insecticides Water Alcoholic drinks Etc. and other liquids compatible with pump materials of construction. Plastic hand siphon pump should only be used with light weight materials that are compatible with pump material polyethylene. Do not use with any media not compatible with materials used in the pump construction. These pumps must never be used with concentrated acids over 35 percent or Acetone and Benzene etc. Discharge tube length is 21 inches and total pump height is 20 inches. Pump bellows are 2 inches in diameter. Suction tube outside diameter is .62 inch. Discounts for 6 or more plastic hand siphon pumps. Discounts will show when ordering.
In Stock	Quantity:
Price: $3.50